COMPUTERS
|
SUPPORT
|
COMPARE
|
NEW
|
ABOUT US
|
WHERE TO BUY
|
SITE MAP
|
|
|
|
PowerSpec PC Systems: Support Archives |
|
Memory Installations
The following table shows several possible memory combinations.
The P5GX-LG system board supports from 2-128MB of 72-pin EDO memory,
70ns or faster. Memory may be installed in any combination as long
as SIMM memory modules must be installed in pairs, and the pairs
have the same specifications, including parity/non-parity, access
speed, and physical configuration. SIMMs must have a "low profile"
to clear the card slots. If installing only two SIMMs, the memory
must be installed in sockets SIMM1/SIMM2.
Bank 0
|
Bank 1
|
Total system
memory installed
|
SIMM 1
|
SIMM 2
|
SIMM 3
|
SIMM 4
|
Size
|
1MB
|
1MB
|
-
|
-
|
2MB
|
4MB
|
4MB
|
-
|
-
|
8MB
|
8MB
|
8MB
|
-
|
-
|
16MB
|
8MB
|
8MB
|
8MB
|
8MB
|
32MB
|
16MB
|
16MB
|
64MB
|
64MB
|
40MB
|
32MB
|
32MB
|
128MB
|
128MB
|
128MB (maximum supported)
|
64MB
|
64MB
|
-
|
-
|
128MB (maximum supported)
|
|
Connector Table
Connector
|
Function
|
Description
|
J1
|
Floppy Drive Controller
|
34-Pin connector connects to 2-device cable; End device is A:,
middle device is B:
|
J3
|
IR port header
|
Connects to optional infrared module cable
|
J4
|
Primary IDE
|
40-pin connector connects to supplied 2-device cable; Primary Master
/ Slave devices via supplied cable
|
J5
|
External PS/2 Keyboard Port
|
Connects to PS/2 Keyboard (or AT keyboard with adapter)
|
J6
|
Secondary IDE
|
40-pin connector connects to supplied 2-device cable; Secondary
Master / Slave devices via supplied cable
|
J7
|
External PS/2 Mouse Port
|
Connects to PS/2 Mouse or other pointing device
|
J8
|
12-pin AT Power Conenctor
|
Connects to power supply leads P8 and P9
|
J9
|
Serial port #1
|
db-9 male serial connector, can be configured COM1, COM3, or disabled
|
J11
|
Case features connector
|
Connections to front panel case features:
- Pins 1-2: "Power ON" LED
- Pins 3-4: Suspend LED
- Pins 5-6: Hard Disk Access LED
- Pins 7-8: Suspend Switch
- Pins 9-10: Reset Switch
|
J12
|
Serial port #2
|
db-9 male serial connector, can be configured COM2, COM4, or disabled
|
J13
|
Case Speaker
|
Connects to case-mounted speaker
|
J14
|
External Parallel Port
|
db-25 female parallel port connector, can be configured to in various
modes via CMOS Setup
|
J15
|
CD Audio In
|
Connects to CD-Audio Out connector on CD ROM drive
|
J16
|
Audio Header
|
Connects to external sound card connections, including Joystick,
Microphone in, Line in, Line out, and Speakers. Audio card does
not support full midi functions
|
P1
|
External VGA port
|
Standard hd-15 female connector; VGA video out
|
SLOT1
|
Riser Card Slot
|
Slot for expansion slot riser card with ISA and PCI expansion
slots
|
GX Sound Card connectors
|
Call Tech Support.
For fee-based technical support, please call
1-614-850-3670 or send us
an email.
Remember, it's important to have your system, model, or serial number
ready when contacting our support staff with technical questions.
Need help? |
|