|
Applicable for PowerSpec
models: 4720, 4820
Windows NT Drivers
 Description/Download
Instructions:
This archive contains a complete set of device drivers for
PowerSpec models 4720 and 4820 using the Intel 810 chipset on the
system board. The self-extracting archive contains, IDE chipset
support, as well as video and audio driver support.
Click on the following link to download this .ZIP compressed file:
nt810drv.exe
Once you have saved the file to your disk drive, double click on
the file to begin the extraction process. The driver files will
be saved to the c:\powerspec\drivers directory by default, although
you change this location.
Installation Instructions:
Video Drivers
After installing Windows NT Service Pack 3 (or higher), Windows
NT will support some plug and play agp video devices. Locate the
c:\PowerSpec\drivers\Graphics directory and double click on the
SETUP.EXE file to install the video drivers and software. Restart
the system, Windows NT should detect new hardware and launch the
wizard to set and test the different video modes with your display.
Sound Drivers
Open the Windows NT Control Panel, double click on the Multimedia
icon. Click on the "Devices" tab and click the Add button.
Select "Unlisted or Udated driver" and click "OK".
In the Install driver window, use browse to point to the "c:\PowerSpec\drivers\audio
directory and Click OK.
|
Notes:
If any of the driver installs ask for the original
Windows NT CDROM, you must reinstall any service packs again.
Windows NT will overwrite Service Pack system files with older
versions, causing unpredictable or erratic behavior. Reinstalling
the Service Pack corrects this. Service Pack 3 or higher must
be installed to support AGP video.
|
|
